TTLET TT-FM29B FM Transmitter connect your devices via Bluetooth, transmit sound wave from your devices to FM radio, its power from the cigarette lighter with 1.5m cable and a plug with USB port output 2.1A current. The FM Transmitter can be stick to any of flat surface in your car with the magnetic base and the double sided tape on that base. With its 1.5m cable and the base attached, you can easily set it up in whatever any model of vehicles. Just enjoy the music on the Micro SD card or your devices with Bluetooth, and hands free calling while you are driving
Features:
Music player + Car Charger + FM transmitter
360 degree angle adjustable, and applicable for all type of vehicles with cigarette lighter and FM radio receiver
Digital LED display
Hands free calling via Bluetooth 3.0
1.5m cable get you free from cigarette lighter
Support Micro SD card
Call Echo Cancellation and Noise Reduction(CVC) technology
Notes:1. There is a USB port on the plug. with maximum output of 5V/2.1A.2. Once booted, the product will connect automatically with the phone via Bluetooth.3. A built-in antenna is provided for the product, please avoid using the broadcasting station frequency that is with strong signal so as to get better sound effect.4. The method to operate the Bluetooth may differ due to the difference of the phones applied.5. Some phones may not support automatic connection if they are powered on after the power failure. If so, please connect them by hand.7. This product is compatible with more than 95% phones on the market but some are still incompatible. Please pay attention to it when purchasing our product.8. The volume should be proper during the call to avoid affecting the other party.9. Do not use this product in the environment with high temperature, dusts or moisture.10. Avoid dropping the product to prevent damage to the surface or the body.11.The Bluetooth of this product supports background play. If there is a prompt tone when playing music with LINE function, it will be automatically switched to the Bluetooth mode. To return to LINE function, please pull and plug LINE again.
